Paxar 9474 - Manual (Page 17)

O n D e m a n d
This printing method is only used for labels. In this mode, the
printer prints and dispenses one label at a time. The next label is
not printed until the completed label is removed from the printer.
1. Open the front panel.
2. Turn the printhead lever to the left to release the printhead.
Also, see the supply loading figure on inside front panel of
printer.
3. If you are reloading supplies
◆ Cut the backing paper in front of the paper take-up spool.
◆ Manually rewind the supply.
◆ Remove the backing paper from the paper take-up spool.
Printhead
Lever
2-6 Loading Supplies