Paxar 9474 - Manual (Page 21)

21. Push the power switch on.
◆ If you are replacing the supply with a new roll of the same
size, press 1 to align the printer.
◆ If you are changing supply type, adjust the supply sensor
if necessary.
A d j u s t i n g t h e S u p p l y S e n s o r
The supply sensor in the printer controls how much supply feeds
between tags or labels. The supply sensor reads black marks or
feed apertures. To read black marks or apertures, the sensor
must be aligned with the black mark or aperture on the tag.
Otherwise, you’ll see an error message when you try to print.
The sensor adjustment knob moves the sensor in and out.
When moving the sensor
◆ Turn the sensor adjustment knob clockwise to move the sensor
away from the inside edge of the supply.
◆ Turn the sensor adjustment knob counterclockwise to move the
sensor toward the inside edge of the supply.
Sensor
Adjustment
Knob
2-10 Loading Supplies