Paxar 9474 - Manual (Page 148)

5. After the data entry prompts, you may see one or more of the
following prompts. These prompts define the supply for
printing.
Number of parts [1-5]: _ Enter a number from 1-5 for the number
of parts for the supply and press
e .
The number you type indicates the
number of times you want the data
printed across the tag width. The supply
may be perforated or not perforated.
For example, if you want the data to
print only once across the tag, then type
1 for a one part supply.
Cutting [Y/N]: _ Type Y or N and
press
e .
Type Y to cut between each tag or set of
tags. Type N to print all the tags in one
strip.
Cut last ticket [Y/N]: N Type Y or N and
press
e .
If you type Y, the printer will cut the last
tag or label in the batch as soon as it is
printed. If you type N, the last tag or
label will remain in the printer until the
next batch begins to print.
If you choose Y, the printing shifts 0.78 inch
toward the top of the supply (the edge of the
supply that exits the printer last). Choose Y
only if your Format Record tells you to do so.
Printing Offline and Batches 8-5