Paxar 9474 - Manual (Page 50)

A d j u s t i n g t h e P r i n t P o s i t i o n
This feature adjusts where the data prints on the supply.
It is only for slight adjustments.
◆ If the data overlaps the preprint on the supply, enter steps to
move the printing down.
◆ If the data is too close to the bottom, enter steps to move the
data up.
The default is increase (I) from step zero (0). The steps are in
1/192 inches (one dot). A dot is the smallest area on which the
printer can print. Increase moves the print up; decrease moves
the print down.
1. From the main menu select Printer Options and press e .
2. When you see
Select Printer Option:
Use Batch Separators
press d until you see Adjust Print Position, then press
e .
3. You’ll see
Print adjustment
I)ncrement or D)ecrement? I
Setting Printer Options 5-5