Paxar 9474 - Manual (Page 51)

4. Now you can
◆ Type I and press e to move the data up. You’ll see
Amount of Print increase
[0-144]: 0__ (Steps)
Enter a number from 0-144 for the amount of space to move
the data and press e . For example, 10 moves the print
.052" (there are .0052" per dot). The screen then shows the
Print Option menu.
◆ Type D and press e to move the print down. You’ll see
Amount of Print decrease
[0-144]: 0__ (Steps)
Enter a number from 0-144 for the amount of space to move
the data and press e . The screen then shows the Print
Option menu.
5. Select another print option or press 1 to exit to the main
menu.
D e f i n i n g a C o s t C o d e
This function lets you define a code to translate data entered by
the operator. Your code can be letters, numbers, or special
characters (such as / or $).
When defining your translation, the type of data the operator
enters must match the data type in the translation table. For
example, if your translation table has numeric data as the
"entered data," you must define the cost code field in the format
as numeric.
Do not use the cost code feature with
sub-fields or merged fields. The translation
only occurs in the cost code field.
5-6 Setting Printer Options