Paxar 9474 - Manual (Page 122)

Data entry prompt: _ _ _ _ _ _ _
For ’Field 01’ press ENTER Type UPCA and press e .
The prompt you will see at data entry is:
UPCA ?
Enter location (inches) for
’Field 01’ H = 0.00 V= 0.00 Type 025 for .25 and press e ; type
05 for .50 and press e .
The lower left corner of this field will be
located .25 inch from the left side of the
tag, and .50 inch from the bottom of the
tag.
Top of field towards: T
T)op, L)eft, B)ottom or R)ight Press e .
The top of this field will point toward the
top of the tag.
Enter type of field: T
T)ext or B)arcode Type B and press e .
This field will print a bar code.
Select barcode:
UPCA Press e .
The bar code type is UPCA.
Barcode height: 0.00 Type 075 for .75 inch and press e .
The bar code will be .75 inch high.
Human Readable Characters: N
A)bove, B)elow, or N)one Type B and press e .
The human readable characters will print
below the bar code.
Include extended characters in
Human Readable [Y/N]: N Press e .
The number system character and
check digit will not print with the bar
code.
Entering a Format 7-3