Paxar 9474 - Manual (Page 54)

D e f i n i n g t h e S u p p l y Ty p e
The printer contains a sensor to detect the supply. You must tell
the printer the type of supply you’re using; die cut or black
mark/aperture. This screen also allows you to recalibrate the
printer if the format should become misaligned as you are printing
batches.
Aperture Black Mark
(through supply) (on back of supply)
1. From the main menu select Printer Options and
press e . You’ll see
Select Printer Option:
Use Batch Separators
2. Press d until you see Define Supply Type, then
press e . You’ll see
Select Supply Type: B
A)lign, B)lack Mark or D)ie Cut
◆ Press e for black-mark or aperture supplies.
◆ Type D and press e for die-cut supplies.
◆ Type A and press e if the printing is not aligned properly
on the supply.
Setting Printer Options 5-9