Paxar Wireless Ethernet Print Server Monarch 7411 User Manual

Paxar Printers

Paxar® is a trademark of Paxar Corporation.
Monarch

®, MonarchNet2, 7411, and 9855® and 9860 are trademarks of Paxar Americas, Inc. a subsidiary

of Avery Dennison Corp. Avery Dennison

® is a trademark of Avery Dennison Corp.

Microsoft, Windows, and NT are trademarks of Microsoft Corporation.
Novell and NetWare are trademarks of Novell, Inc.
HP Jet Admin and HP Web Jet Admin are trademarks of Hewlett-Packard, Inc.
Other products are trademarks or registered trademarks of their respective
companies and are hereby acknowledged.

TC7411MN2SG Rev. AC 12/07

E T H E R N E T S E T U P G U I D E

The Monarch

® 7411™ wireless Ethernet Print Server lets you communicate

with a Monarch

® 9855® or 9860™ printer on a 10baseT or 100baseTX wired

Ethernet network or on an 802.11b or 802.11g wireless network. The print
server operates in Ad-Hoc (peer-to-peer) mode or infrastructure (access
point) wireless mode. You can also remotely manage and download print
batches, formats, printer configurations, and fonts. MonarchNet2™ software
is available on your printer for a licensing fee. Contact your sales
representative for more information about MonarchNet2, or visit our Web
site (www.paxar.com).

The print server supports multiple network protocols for users with
Telnet/FTP, Microsoft

® Windows® 98, 2000, NT®, XP, and Vista™, TCP/IP

(including LPR/LPD, Bootp, DHCP, and HP JetDirect

™), Novell® NetWare®

and SNMP. All protocols are simultaneously active.

Note:

When turning on the printer or after sending a ^PR (printer reset)
immediate command, wait at least 30 seconds before sending data
to the print server. Any data sent to the print server before the
30-second interval may be lost.

S e t t i n g U p t h e P r i n t S e r v e r

From the Main menu, select Setup, Port Settings, then Parallel Comm.
Then, follow these steps:

1. Press

until you see

PARALLEL COMM

Port

2. Press Enter/Pause. Press

until you see

PORT

Internal