Savin 3799nf - Manual (Page 92)

Other Transmission Features
80
3
GGGG
Press the
{{{{Start}}}} key.
Note
❒ When in Immediate Transmis-
sion, if the other party does not
support this function, an error
message appears on the display.
SEP/PWD (SEP Code Polling
Transmission)
Normally you can only use Polling
Transmission/Reception between fax
machines of the same make that have
the Polling Transmission/Reception
feature. However, if the other ma-
chine supports a similar feature
called SEP/PWD, you can send faxes
or receive messages using this polling
method instead.
You can also use SEP Code Polling
Transmission to retrieve documents
stored in information boxes regis-
tered in other fax machines.
Preparation
You need to assign the Dial Op-
tions feature to a User Function
key beforehand. See p.154 “User
Function Keys”.
Note
❒ The ID can be up to 20 digits long
and consist of digits, spaces,
p
and
q.
❒ You can also store the SEP Codes
in addition to the other parties
names and fax numbers in Quick
Dial keys, Speed Dials, or Key
Stroke Programs.
❒ Messages you send using this fea-
ture are marked "SEP" on the re-
ports below:
• File Reserve Report (Memory
Transmission)
See p.107 “File Reserve Report
(Memory Transmission)”.
• File Reserve Report (Polling Re-
ception)
See p.21 “File Reserve Report
(Polling Reception)”.
❒ Make sure that the ID you enter
conforms with the specifications of
the other party's fax machine.
Reference
p.22 “Polling Transmission”
p.19 “Polling Reception”
p.251 “Information Boxes”
p.63 “Quick Dial”, tures>
p.76 “Speed Dial”, tures>
p.87 “Groups”,
p.136 “Program/Delete Menu”
AAAA
Press [Mode].
The Transmission Mode menu ap-
pears.
BBBB
Enter the code for "Polling RX"
with the number keys.
Note
❒ If "Polling RX" is not displayed,
press [
↑↑↑↑Prev.] or [↓↓↓↓Next] until it
is.