Savin 3799nf - Manual (Page 235)

Initial Set Up
223
7
NNNN
Press [Exit].
OOOO
Press
0 0 0 0 or 1 1 1 1 key to turn this
function on or off.
PPPP
Press [OK].
QQQQ
Press [PrevMenu] twice.
RRRR
Press [Exit] to return to the stand-
by mode.
Deleting Specified Senders
You can delete registered Specified
Senders as necessary.
Reference
See p.239 “Deleting Specified
Senders” for the deleting proce-
dure.
Printing the Specified Sender List
You can check the registered Speci-
fied Senders by printing out the list of
the registered Specified Senders.
Reference
See p.241 “Printing the Specified
Sender List” for the printing proce-
dure.
Forwarding
With this feature, messages from
Specified Senders are printed then
forwarded to a pre-registered desti-
nation (Forwarding Address). For ex-
ample, when you are away on a trip,
you can have messages automatically
sent to where you are staying.
Note
❒ It is recommended that you print
the Specified Sender List and keep
it after registering or editing set-
tings for this function. See p.217
“Printing the Specified Sender
List”.
❒ To use the Forwarding function,
you need to turn on the function
after specifying the Forwarding
Address.
❒ If a sender is specified for both
Memory Lock and Forwarding
functions and the Memory Lock is
turned on, the messages from the
sender are not forwarded.
❒ Messages received with Confiden-
tial Reception, Memory Lock, Poll-
ing Reception, or Transfer Request
are not forwarded.
❒ Register the Own Name or Own
Fax Number of the other party as
the Specified Sender. If the other
party has not registered their Own
Name or Own Fax Number, you
cannot register them as a Specified
Sender and forwarding is not pos-
sible.
❒ You can choose to forward mes-
sages from Specified Senders, or
messages from senders other than
Specified Senders using the main
paper tray with User Parameters.
S e e p . 1 7 8 “ U s e r P a r a m e -
ters”(switch 08 bits 7,6).