Savin 3799nf - Manual (Page 251)

Initial Set Up
239
7
NNNN
Press [Exit].
OOOO
Press
0 0 0 0 or 1 1 1 1 key to turn this
function on or off.
Note
❒ You can choose to save only
messages from Specified Send-
ers, or save all messages except
those from Specified Senders.
Adjust this setting with User
Parameters. See p.178 “User Pa-
rameters”(switch 09 bits 3, 2).
PPPP
Press [OK].
QQQQ
Press [PrevMenu] twice.
RRRR
Press [Exit] to return to the stand-
by mode.
Deleting Specified Senders
You can delete registered Specified
Senders as necessary.
Reference
See p.239 “Deleting Specified
Senders” for the deleting proce-
dure.
Printing the Specified Sender List
You can check the registered Speci-
fied Senders by printing out the list of
the registered Specified Senders.
Reference
See p.241 “Printing the Specified
Sender List” for the printing proce-
dure.
Deleting Specified Senders
Use this procedure to delete Specified
Senders for the following features:
Reference
p.214 “Multi-copy Reception”
p.217 “Authorized Reception”
p.220 “Specified Tray”
p.223 “Forwarding”
p.233 “Memory Lock”
p.236 “TX/RX File Save Settings”
How to Delete Specified Senders
Note
❒ For information about how to de-
lete Specified Senders for the For-
w a r d i n g f u n c t i o n , s e e p . 2 2 9
“Deleting Specified Senders (For-
warding)”.
The example below describes how to
delete Specified Senders for the
Multi-copy Reception feature. The
procedure for other functions is iden-
tical except for steps
E and L.
AAAA
Press the
{{{{User Tools}}}} key.