Savin 3799nf - Manual (Page 151)

Program/Delete Menu
139
6
D Press [Exit].
NNNN
Press [OK]
Note
❒ If you press 0 or 1 key, you
can view and check end receiv-
ers already stored.
❒ To delete the displayed end re-
ceiver, press the
{{{{Clear}}}} key.
❒ To cancel programming this
Group, press [Cancel]. The dis-
play in step
E will reappear.
OOOO
Press [PrevMenu] three times.
PPPP
Press [Exit] to return to the stand-
by mode.
Storing and Changing
Keystroke Programs
If you regularly send messages to a
particular destination or transmit us-
ing the same features, you can save a
lot of repetitive keypad operations by
storing these settings in a Keystroke
Program.
Keystroke Programs can then be re-
called by just pressing a Quick Dial
key or Speed Dial. The following pro-
cedure can be used to program a new
Keystroke Program or overwrite an
old one.
You can register the following items
in Keystroke Programs:
• Memory Transmission, Immediate
Transmission, Send Later, Fax
Header Print, Confidential Trans-
mission, Transfer Request, Polling
Transmission, Free Polling Trans-
mission, Polling Reception, Own
Name/Own Fax Number, Trans-
fer Stations, End Receivers, User
Codes, Confidential IDs, Polling
IDs, SUB Code Transmission with
the Mode Key, SEP Code Polling
Reception, SEP/SUB/PWD/SID
Codes.
• Program name (up to 20 charac-
ters)
Note
❒ We recommend that you print the
Keystroke Program List and keep it
when you register or change a func-
tion. See p.149 “Reports/Lists”.
❒ You cannot register a program in a
Quick Dial key or Speed Dial al-
ready used for another function.
❒ Keystroke Programs can only be
stored in Speed Dials when the op-
tional Function Upgrade Unit is in-
stalled.