Savin 3799nf - Manual (Page 141)

Copying
129
5
FFFF
Press the
{{{{Start}}}} key to start copy-
ing.
When copying is complete, stand-
by display reappears.
Note
❒ To stop copying while it is in
progress, press the
{{{{Stop}}}} key.
Then open the ADF cover and
ADF unit and remove any orig-
inals that are left inside.
Reference
p.108 “Clearing Original Jams”,
Making Copies on Special
Paper
You can make copies on special paper
that cannot be loaded in the main pa-
per tray or optional Paper Tray Unit
by using the optional Bypass Tray
Unit.
Set the copy paper with the printable
side facing down.
You can use the following types of
special paper:
• Paper that weighs between 60 and
90 g/m 2 (16 to 24 lb)
• OHP transparencies
• Adhesive labels
• Postcards
Important
❒ If the paper is curled, flatten it be-
fore loading in order to avoid pa-
per jams.
Note
❒ You can load paper in the Bypass
Tray Unit up to approximately 100
sheets (8
1 /
2
"
×11" or smaller size),
or 10 sheets (larger than 8 1 /
2
"
×11"
size). Up to 40 postcards can be
loaded.
❒ Load OHP transparencies one
sheet at a time, and remove them
from the paper tray immediately
after copying is complete.
❒ When making copies on OHP
transparencies, an unusual sound
may be emitted depending on the
type of OHP transparency. To
avoid this, place a sheet of quality
paper on top of the OHP transpar-
ency when loading.
❒ Load postcards in the landscape
orientation (
L).
❒ Postcards that are curled in the
center may cause a paper jam. Be
sure to flatten them before loading.
AAAA
Press the
{{{{Copy}}}} key.
BBBB
Set the original, and select any
scan settings as necessary.