Savin 3799nf - Manual (Page 105)

Transmission Features
93
3
Transmission Features
Stamp
When sending a fax message, the ma-
chine can stamp a circle mark at the
bottom of the document. This stamp
indicates that the document has been
successfully stored in memory for
Memory Transmission, or that it has
been successfully sent for Immediate
Transmission.
Each time you press the
{{{{F3 Stamp}}}}
key, the indicator light is turned on
and off. Turn it on or off if you wish
this function to work.
Note
❒ If a page was not stamped even
though the Stamp feature is turned
on, you need to resend that page.
❒ If you use this feature often, you
can adjust User Parameters so that
the home setting is on. In this case,
Stamp can easily be turned off for
any single transmission by press-
ing the
{{{{F3 Stamp}}}} key. See p.178
“User Parameters” (switch 00 bit
0).
❒ When the stamp starts getting
lighter, replace the cartridge. See
p.234 “Enter the code for "Program
Sender" with the number keys.” .
Auto Reduction
If the other party's fax machine does
not have paper loaded of the same
width as your document, use this fea-
ture to have your document image re-
duced to a suitable width during
transmission.
Important
❒ If you turn this feature off, the
scale of the document is main-
tained and some parts of the image
may be lost when printed at the
other end.
Note
❒ You can switch this feature on and
off with User Parameters. See
p.178 “User Parameters” (switch
07 bit 3).
A
GFSTMP1N
A B
B A
GFREDU0N
Transmitter
(This machine)
Receiver
Reduction
GFREDU1N