Savin 3799nf - Manual (Page 296)

Appendix
284
10
Connecting the Power and Switching On
R WARNING:
R CAUTION:
AAAA
Plug in the cable to the outlet.
BBBB
Turn the power switch on.
Important
❒ Voltage must not fluctuate more than 10%.
❒ The supply from the outlet must not fluctuate more than 12V above or be-
low 120V.
❒ The power cord should not be laid where it might trip somebody.
❒ Do not place anything on the power cord.
❒ If you must use an extension cord, make sure that it is capable of carrying
120V / 8A, and that your facsimile terminal is the only piece of equipment
connected to that cord.
• Connect the power cord directly into a wall outlet and never use an ex-
tension cord.
• Disconnect the power plug (by pulling the plug, not the cable) if the
power cable or plug becomes frayed or otherwise damaged.
• Turn off the power and disconnect the power plug (by pulling the plug,
not the cable) if any of the following occurs:
• You spill something into the machine.
• You suspect that your machine needs service or repair.
• The external housing of your machine has been damaged.
• When you disconnect the power plug from the wall outlet, always pull the
plug (not the cable).