Savin 3799nf - Manual (Page 108)

Other Transmission Features
96
3
Batch Original Documents
Transmission
When sending a fax message which
has a large number of pages, you can
divide and scan the original docu-
ments in parts to store in the memory,
and then send the whole data in one
transmission.
Preparation
Before you can use the Batch Orig-
inal Documents Transmission
function, you need to program this
function into a User Function key
(
{{{{F1}}}} to {{{{F10}}}}). See p.154 “User
Function Keys”.
Limitation
❒ The Immediate Transmission is
not available. Use Memory Trans-
mission.
❒ You cannot use the Document By-
pass Tray to feed the documents
when using this function.
Note
❒ You cannot send batch document
data using Parallel Memory Trans-
mission.
AAAA
Make sure the Memory Transmis-
sion indicator is lit.
Note
❒ If it is not, press the {{{{Transmis-
sion Mode
}}}} key.
BBBB
Press the User Function key (
{{{{F1}}}}
to
{{{{F10}}}}) that the Batch Original
Documents Transmission func-
tion is stored in.
CCCC
Set the first stack of documents.
Note
❒ You can set up to 30 pages
(11"
×17"), 40 pages (8 1 /
2
"
×14"),
or 75 pages (8 1 /
2
"
×11") of docu-
ments at one time.
DDDD
Select any scan settings as neces-
sary.
EEEE
Dial the destination number.
FFFF
Press the
{{{{Start}}}} key.
The machine starts scanning the
documents.
When the scanning of the set docu-
ments is complete, the screen be-
low appears.
Important
❒ Do not attempt to add more
documents into the feeder while
the scanning is in progress. Do-
ing so may result in a document
jam.
GGGG
Set the next stack of documents.