Savin 3799nf - Manual (Page 40)

Transmission Mode
28
1
Transfer Request
Transfer Request allows fax machines
to automatically distribute incoming
messages to multiple fax destina-
tions. This feature helps you reduce
costs when you send the same mes-
sage to more than one place in a dis-
tant area, and saves time since many
messages can be sent in a single oper-
ation.
The following terminology is used in
this section.
❖ ❖ ❖ ❖ Requesting Party
The machine where the message
originates from.
❖ ❖ ❖ ❖ Transfer Station
The machine that forwards the in-
coming message to another desti-
nation.
❖ ❖ ❖ ❖ End Receiver
The final destination of the mes-
sage.
Preparation
Before you can use this feature you
must program the Polling ID and
set the Transfer Report. See p.199
“Registering ID Codes” and p.202
“Transfer Report”.
Limitation
❒ The Transfer Stations you specify
must be machines of the same
make as this machine and have the
Transfer Station function.
❒ This function is not available un-
less the End Receiver's fax number
is stored in either a Quick Dial key
or Speed Dial of the Transfer Sta-
tion.
❒ This function is not available un-
less the Transfer Station's fax num-
ber is stored in either a Quick Dial
key or Speed Dial of the Request-
ing Party's machine (this machine).
❒ Make sure that the return address
is set up correctly in the Transfer
Station's machine to use this func-
tion.
Note
❒ You can specify up to 100 Transfer
Stations and 30 End Receivers in a
Transfer Request.
❒ When you specify Group Dials
stored in the Transfer Station as re-
ceivers, one Group Dial is counted
as one End Receiver.
❒ Polling IDs of the requesting party
(this machine) and Transfer Sta-
tions must be identical.
AAAA
Set the original and select any
scan settings you require.
GFCYUI0N
Requesting
party
Transfer
Station
Transfer
Result Report
End Receiver
End Receiver
End Receiver