Savin 3799nf - Manual (Page 206)

Key Operator Settings
194
7
Registering the Own Fax Number
(CSI)
A Enter the code for "Own Fax
No.(CSI)" with the number
keys.
B Enter the Own Fax Number
(CSI).
Note
❒ Own Fax Number (CSI) can
contain a plus sign (+), num-
bers and spaces. Register
your country code, area code
(minus the leading zero) and
your fax number in that or-
der.
C Press [OK].
FFFF
Press [PrevMenu] three times.
GGGG
Press [Exit] to return to the stand-
by mode.
G4 Digital Line
This function requires the optional ISDN
Unit.
Register these settings before con-
necting to the ISDN. You can store the
following items:
• Own Fax Number 1
Enter the number of the line (IS-
DN) the machine is connected to.
• SPID (Own Fax Number 2)
Enter the second fax number if you
are using two numbers for one
line.
• Sub-address
See p.82 “Sub-address”.
• G4 Terminal ID (TID) (maximum
22 characters)
The G4 Terminal ID (TID) feature
is available only when you are sub-
scribed to an ISDN service. TID is
printed on the fax message re-
ceived on the other end when you
perform G4 transmission with IS-
DN.
Note
❒ Before storing the sub-address,
store the Sub-address function in a
User Function key. See p.154 “User
Function Keys”.
❒ Contact your service representa-
tive when you register or change
the sub-address.
❒ The G4 Terminal ID (TID) consists
of your country code, Own Digital
Number (fax number) and Termi-
nal Name, and is registered in that
order. Company names are nor-
mally used as Terminal Names.