Savin 3799nf - Manual (Page 266)

Key Operator Settings
254
7
EEEE
Enter the SEP Code of the Infor-
mation box you wish to delete.
Note
❒ If you enter the code incorrectly,
press the
{{{{Clear}}}} key or the
{{{{Stop}}}} key, then try again.
FFFF
Press [OK].
Note
❒ If a password is already regis-
tered, enter the password, then
press [OK].
GGGG
Press [Yes].
HHHH
Press [Yes].
Note
❒ If you press [No], the box is not
deleted and the display in step
E reappears.
IIII
Press [PrevMenu] three times.
JJJJ
Press [Exit] to return to the stand-
by mode.
Transfer Boxes
This feature turns your machine into
a fax relay station. Documents sent
with a SUB Code that matches the
SUB Code registered as a Transfer
Box are received then relayed to the
registered receiver.
Since documents can be sent to multi-
ple destinations in a single transfer re-
q u e s t , y o u c a n e c o n o m i z e o n
communication costs when sending
to remote destinations.
Note
❒ Inform the requesting party of the
SUB code assigned to the Transfer
Box. When they wish to have a
message transferred by your ma-
chine, ask them to send the mes-
sage using SUB Code Transmission
and specifying this SUB code. If a
password is also registered, inform
them of this too and ask them to en-
ter it for the SID code. See p.78
“SUB/SID (SUB Code Transmis-
sion)” and p.13 “SUB Code Trans-
mission with the Mode Key”.
GFCYUB0N
End Receiver
End Receiver
End Receiver
A
B
C
This Machine i Transfer Station j
Print
Requesting party
Transfer
Request
SUB:7777
SUB Code : 7777
End Receiver : A,B,C
SUB Code : 8888
End Receiver : D,E,F
SUB Code : 9999
End Receiver : G,H,I
Transfer Box