Sub/sid (sub code transmission) – Savin 3799nf User Manual
Page 90
Other Transmission Features
78
3
SUB/SID (SUB Code
Transmission)
Normally you can only use Confiden-
tial Transmission or Transfer Request
to send to fax machines of the same
make that have the Confidential Re-
ception or the Transfer Request fea-
ture. However, if the other machine
supports a similar feature called
SUB/SID, you can send fax messages
to the other party using this method
instead.
You can also use SUB code Transmis-
sion to send messages to Personal
Boxes and Transfer Boxes registered
in other fax machines.
Preparation
You need to assign the Dial Op-
tions feature to a User Function
key beforehand. See p.154 “User
Function Keys”.
Limitation
❒ SUB Code Transmission is only
available with G3, and is not avail-
able with G4.
Note
❒ When specifying Transmission
with the Default ID, the SUB Code
of the Sub Code Transmission with
the Mode key function is not avail-
able. See p.13 “SUB Code Trans-
mission with the Mode Key”.
❒ You can enter numbers up to 20
digits.
❒ You can also store the SUB Codes
in addition to the other parties
names and fax numbers in Quick
Dial keys, Speed Dials, or Key
Stroke Programs.
❒ SUB Codes are printed on the fol-
lowing reports:
• File Reserve Report (Memory
Transmission)
See p.107 “File Reserve Report
(Memory Transmission)”.
Reference
p.7 “Sending Confidential Messag-
es”
p.28 “Transfer Request”
p.246 “Personal Boxes”
p.254 “Transfer Boxes”
p.63 “Quick Dial”,
AAAA
Set the original and select any
scan settings you require.
BBBB
Dial the destination fax number
with the number key.
CCCC
Press the User Function key (
{{{{F1}}}}
to
{{{{F10}}}}) assigned with the Dial
Options feature.
DDDD
Enter the code for "SUB" with the
number key.