Savin 3799nf - Manual (Page 201)

System Settings
189
7
Note
❒ If you press [Cancel], the display
in step
D reappears.
❒ The bits are displayed in as-
cending order from right to left,
the right most bit being bit 0.
❒ Some items use multiple bits for
their settings such as "Image
density adjustment level."
HHHH
Press [PrevMenu] twice.
IIII
Press [Exit] to return to the stand-
by mode.
Printing the User Parameter
List
Print the User Parameter List manual-
ly to check the current User Parame-
ter settings.
AAAA
Press the
{{{{User Tools}}}} key.
BBBB
Enter the code for "Key Op.
Tools" with the number keys.
Then press the
{{{{q q q q}}}} key.
The "Key Op. Tools" main menu
appears.
CCCC
Enter the code for "System Set-
tings" with the number keys.
DDDD
Enter the code for "Prt. User
Param." with the number keys.
EEEE
Press the
{{{{Start}}}} key to print the
list.
Note
❒ If you press [Cancel] before
printing starts, the printing
stops and the display shown in
step
D appears again.
FFFF
Press [PrevMenu] twice.
GGGG
Press [Exit] to return to the stand-
by mode.
G3 Analog Line
You need to make settings for the G3–
1 Analog Line before you connect the
machine to a standard G3 analog line,
and for the G3–2 Analog Line to con-
nect to a G3 analog line by installing
the optional Extra G3 Interface Unit.
❖ ❖ ❖ ❖ G3–1 Analog Line
• Own Fax Number (CSI) (up to
20 digits)
Register an international identi-
fication number as your Own
Fax Number (Called Station
Identification), which is passed
to the other party when you
send or receive a fax.
• PSTN Line Type
Select whether the connected
line uses tone or pulse dialing.