Savin 3799nf - Manual (Page 169)

User Function Keys
157
6
Note
❒ To see a function number not
displayed on the display, press
[
↑↑↑↑Prev.] or [↓↓↓↓Next].
❒ If another function is already
registered, press the
{{{{Clear}}}} key
or the
{{{{Stop}}}} key to delete it.
FFFF
Press [OK].
Note
❒ If you press [Cancel], the func-
tion is not stored and the dis-
play shown in step
D appears
again.
❒ If you press another User Func-
tion key here, you can register
or edit another function by fol-
lowing the procedure described
above.
GGGG
Press [PrevMenu] twice.
HHHH
Press [Exit] to return to the stand-
by mode.
Programming a User Function Key on the
Job
When carrying out an operation from
the control panel, you can store the
various operations that you have per-
formed so far in a User Function key.
Once stored, just press that User
Function key when the standby dis-
play is shown to carry out those oper-
ations.
Note
❒ You cannot store the following op-
erations in User Function keys:
• User Function settings
• Quick Dial, Speed Dial, Group
Number, File No, Confidential
ID, Memory Lock ID, or Opera-
tions carried out after specify-
ing a User Code (SUB code).
The following example procedure de-
scribes how to store the time setting
for Send Later in User Function key
{{{{F5}}}}.
AAAA
Press [Mode].
BBBB
Enter the code for "Send Later"
with the number keys.
CCCC
Press
{{{{F5}}}}.
DDDD
Press [Yes].
{{{{F5}}}} is registered and the display
showing the operation in progress
reappears.