Savin 3799nf - Manual (Page 23)

User Code Transmission
11
1
B Press [Yes].
Proceed to step
G.
EEEE
Press [OK].
The Transmission Mode menu is
shown again. A check mark is add-
ed to "User Code".
Note
❒ When an unregistered User
Code is entered, the following
message appears: "
Not pro-
grammed. " then the display in
step
D will reappear.
❒ To cancel the User Code Trans-
mission, press [Cancel]. The
Transmission Mode menu is
shown on the display.
FFFF
Press [Exit].
The User Code screen appears.
Note
❒ "User Code" is shown on the
display. If you set up other
transmission mode functions
(except Polling Reception),
"
Others " is displayed.
GGGG
Dial, and then press the
{{{{Start}}}}
key.
Note
❒ You can cancel transmission of
a message set up for Personal
Transmission. See p.35 “Cancel-
ing a Transmission or Recep-
tion” .