Savin 3799nf - Manual (Page 202)

Key Operator Settings
190
7
• PSTN Access Number
Use this setting if your machine
is connected to a PBX that re-
quires you to dial certain num-
ber such as "0" followed by a
pause to connect to the outside
line. By registering "0" as the
PSTN Access Number, a pause
will be inserted automatically
after the "0" when dialing.
❖ ❖ ❖ ❖ G3–2 Analog Line
• Own Fax Number (CSI) (up to
20 digits)
Register an international identi-
fication number as your Own
Fax Number (Called Station
Identification), which is passed
to the other party when you
send or receive a fax.
• PSTN Line Type
Select whether the connected
line uses tone or pulse dialing.
• PSTN Access Number
Use this setting if your machine
is connected to a PBX that re-
quires you to dial certain num-
ber such as "0" followed by a
pause to connect to the outside
line. By registering "0" as the
PSTN Access Number, a pause
will be inserted automatically
after the "0" when dialing.
Note
❒ The Own Fax Number (CSI) is
passed to the other party when
you send or receive a fax. When
the Own Fax Number is received,
it is shown on the display or print-
ed on reports on the receiver's or
sender's machine. The Own Fax
Number works even if the receiver
or sender uses a different make of
machine.
AAAA
Press the
{{{{User Tools}}}} key.
BBBB
Enter the code for "Key Op.
Tools" with the number keys.
Then press the
{{{{q q q q}}}} key.
The "Key Op. Tools" main menu
appears.
CCCC
Enter the code for "System Set-
tings" with the number keys.
DDDD
Enter the code for "G3 Analog
Line" with the number keys.
Note
❒ If "G3 Analog Line" is not dis-
played, press [
↑↑↑↑Prev.] or [↓↓↓↓Next]
until it is.
EEEE
Enter the code for either "G3-1
Analog Line" or "G3-2 Analog
Line" with the number keys.