Savin 3799nf - Manual (Page 36)

Transmission Mode
24
1
EEEE
Press [
S S S SFile] to specify whether to
save the stored original or not.
Each time you press the key, the
text at the middle right corner of
the display switches between
"Save" and "Use once".
Note
❒ To delete the document imme-
diately after transmission, select
"Use once". To repeatedly send
the document, select "Save".
❒ You can set "Use once" or "Save"
to be shown first on the display
with User Parameters. See p.178
“User Parameters”(switch 11 bit
7).
FFFF
Press [OK].
The Transmission Mode menu is
shown. A check mark is added to
"Polling TX".
Note
❒ To cancel the Polling Transmis-
sion, press [Cancel]. The Trans-
mission Mode menu is shown.
GGGG
Press [Exit].
The standby display is shown.
Note
❒ "Polling TX" is displayed. If you
set up other transmission mode
functions (except Polling Recep-
tion), "
Others " is displayed.
HHHH
Press the
{{{{Start}}}} key.
Your document is scanned in.
Note
❒ You can cancel transmission of
a message set up for Polling
Transmission. See p.35 “Cancel-
ing a Transmission or Recep-
tion” .