Savin 3799nf - Manual (Page 134)

Reception Features
122
4
❒ This feature is not available when
the Image Rotation function is
turned on. See p.122 “Image Rota-
tion”.
❒ You can turn this feature on or off
with User Parameters. See p.178
“User Parameters” (switch 10 bit
1).
❒ This feature uses Memory Recep-
tion.
Image Rotation
If you have installed paper in the tray
sideways
K, incoming fax messages
will be rotated automatically to fit on
the paper.
Note
❒ This feature is not available with
Polling Reception.
❒ You can turn this feature on or off
with User Parameters. See p.178
“User Parameters” (switch 10 bit
2).
❒ Two In One setting is disregarded
when this function is turned on.
See p.121 “Two In One”.
❒ The document may be slightly re-
duced both vertically and horizon-
tally when printed out.
❒ You can choose to have received
messages printed from a specified
tray. See p.220 “Specified Tray”.
❒ This feature uses Memory Recep-
tion.
Rotate Sort
W h e n b o t h 8 1 /
2
"
× 1 1"K a n d
8 1 /
2
"
×11"L copy paper is loaded, A4
size incoming faxes are delivered al-
ternating by message between
K and
L directions.
Note
❒ Rotate Sort is available with the
following functions:
• Memory Reception
• Substitute Reception
• Confidential Reception
• Memory Lock Reception
• Lists and Reports
❒ This feature is not available with
Polling Reception.
❒ If the Specified Tray function is
turned on, output may not alter-
nate between
K and L.
❒ Two In One output is not available.
❒ If the incoming message is wider
than 8 1 /
2
" and neither 8 1 /
2
"
×11"K
or 8 1 /
2
"
×11"L paper is loaded, this
feature is not available.
❒ When 11"×17" paper is loaded, if
you receive long documents of
8
1 /
2
" width, they are printed on
11"
×17" size paper.
❒ Documents may not be printed
with A4
K after the machine exit-
ed from Energy Saver Standby
mode. See p.300 “Energy Saving”.
❒ In order to use this function, Image
Rotation needs to be switched on
with User Parameters. See p.178
“User Parameters” (switch 10 bit
2).
GFKAIR0N
your machine