Savin 3799nf - Manual (Page 285)

Changing the Paper Size
273
9
GGGG
Insert the end plate into the slot
for the desired paper size.
Important
❒ Make sure that the end plate is
properly inserted so that the
tabs at the lower end of the plate
are securely fastened to the bot-
tom plate of the unit.
HHHH
Fan a stack of paper and even the
edges, then load it in the unit with
t h e p r i n t a b l e s ur fa c e f a c i n g
down. Make sure that the top of
the paper is under the notches in
the corner of the unit.
Important
❒ Make sure not to load paper
over the limit mark.
IIII
Replace the optional Paper Tray
Unit carefully.
Changing the Paper Size in the
Optional Bypass Tray Unit
Important
❒ Make sure that copying or printing
of received fax messages is not in
progress.
Note
❒ You can load up to approximately
100 sheets (8 1 /
2
"
×11" or smaller
s i z e ) , 1 0 s h e e t s ( l a r g e r t h a n
8
1 /
2
"
×11" size) or 40 postcards (L
only) in the optional Bypass Tray
Unit.
❒ For information on the size and
orientation of copy paper that you
can load in the unit, see p.298 “Pa-
per”.
AAAA
Shift the paper hold lever toward
the machine.
BBBB
Remove any remaining paper.