Changing common settings for a job – HP 9100 series User Manual
Page 91
ENWW
Changing common settings for a job 89
7
To specify the time after the delay, use one of the following methods:
•
Press - or + to specify the time (the time increments in 15-minute steps), and then press
(select).
•
Use the keypad or keyboard to type the time, and then press
(select).
8
Press S
TART
.
Changing common settings for a job
Change the settings for a job when you want to use something other than the defaults that
have been set up or when when you want to use an optional feature such as collation or
double-sided printing. Any changes that you make apply only to the current job.
You can change settings by using two methods:
z
Use an option button on the control panel (for example, Q
UALITY
).
z
Open the fax mode menu and select the option that you want to change (for example
Resolution
).
See
for an explanation of the options.
To change common settings in the fax mode menu
1
On the control panel, press F
AX
.
2
Press
(down) to move to the option that you
want, and then press
(select).
3
Press - or + to select the value that you want,
and then press
(select).
=GROUP > Send black fax STD Lighter/darker 0 Send non-realtime OFF Paper size LETTER Setup F AX
Resolution