Setting the powersave mode time, Setting the ring and beep volumes – HP 9100 series User Manual
Page 118
116 9 - Managing the administrator functions
ENWW
• Automatic fax reports (see
Setting the automatic printing of fax reports
for more
information)
• Busy redial, no answer redial (see
for more information)
Automatically reducing incoming faxes
for more information)
Setting the fax error-correction mode
for more information)
Note
If you change the country/region setting, all of the settings that it controls revert back to the
default for the country/region that you select.
To set the language
z
Embedded Web server (network connection)
Open the embedded Web server, click the Settings tab, and then click International in
the left pane. Click the Language tab and set the language configuration.
z
Control panel
Press M
ENU
, open the
ADMIN
menu, and use the
Language
option.
To set the country/region
z
Embedded Web server (network connection)
Open the embedded Web server, click the Settings tab, and then click International in
the left pane. Click the Country/Region tab and set the language configuration.
z
Control panel
Press M
ENU
, open the
ADMIN
menu, and use the
Country/region
, option.
Setting the PowerSave mode time
This procedure sets how long the all-in-one remains idle before it enters the PowerSave mode
(for example, 15 minutes, 1 hour, or 4 hours). The PowerSave mode minimizes the amount of
power that the all-in-one consumes when it is idle and reduces wear on electronic
components. When the all-in-one enters the PowerSave mode, the backlight turns off and the
following message appears on the control-panel display:
Power Save On
. Any interaction with
the all-in-one takes the all-in-one out of PowerSave mode (for example, pressing a button or
opening a tray, or receiving new data).
To set the PowerSave mode time
z
Control panel
Press M
ENU
, open the
MAINTENANCE
menu, and use the
Setpowersave mode time
option.
Setting the ring and beep volumes
You can control the volume of the following sounds:
z
The beeps that are emitted when you press the control-panel buttons
z
The beeps that are emitted when originals are detected in the ADF
z
The phone line sounds for outgoing faxes
z
The ring volume for incoming faxes