Changing common settings for a job – HP 9100 series User Manual
Page 77
ENWW
Changing common settings for a job 75
Changing common settings for a job
Change the settings for a job when you want to use something other than the defaults that
have been set up or when you want to use an optional feature such as collation or
double-sided printing. Any changes that you make apply only to the current job.
You can change settings using two methods:
z
Use an option button on the control panel (for example, Q
UALITY
).
z
Open the scan mode menu and select the option that you want to change (for example,
Resolution
).
See
Setting defaults for all scan jobs
for information about changing defaults.
See
for an explanation of the options.
To change common settings in the scan mode menu
1
On the control panel, press S
CAN
.
2
Press
(down) to move to the option that you
want, and then press
(select).
3
Press - or + to select the value that you want, and
then press
(select).
1-SIDED
Type
MIXED
Paper size
LETTER
Resolution
300DPI
Lighter/darker
0
Prefix
Setup
S
CAN