HP 9100 series - Manual (Page 240)

238 A - Control-panel mode and setup menus ENWW
Setup menus
Printer driver and program settings override control panel settings for the current job. Program
settings override default printer driver settings.
This section contains information about the following topics.
z Reaching and using a setup menu
z Printing a setup menu map
z PRINT REPORT menu
z COPY SETUP menu
z FAX SETUP menu
z ADV FAX SETUP menu
z SCAN SETUP menu
z E-MAIL SETUP menu
z PHOTO menu
z PRINTER menu
z NETWORK & I/O menu
z ADMIN menu
z MAINTENANCE menu
Reaching and using a setup menu
1 On the control panel, press M ENU .
2 Press (up) or (down) to move to the item you want, and then press (select).
3 Press - or + to select the value that you want, and then press (select) to save the
setting.
If there is no - or + around the setting, the setting cannot be changed.
Printing a setup menu map
1 On the control panel, press M ENU .
2 With the cursor next to PRINT REPORT , press (select).
3 With the cursor next to Menu map info , press (select).