HP 9100 series - Manual (Page 120)

118 9 - Managing the administrator functions ENWW
By factory default, all supported network protocols are turned on. Turning off unused protocols
has the following benefits:
z It decreases the network traffic that the all-in-one generates.
z It prevents unauthorized users from printing to the all-in-one.
z It provides only pertinent information on the Configuration page.
z It allows the control panel to display protocol-specific error and warning messages.
Note Do not turn off the IPX/SPX protocol if Windows 98, Windows NT, Windows Me,
Windows 2000, or Windows XP users will be printing to the all-in-one.
Note the following support for any activity that involves moving a file to a network folder:
z The all-in-one does not support Kerberos, NTLM v2, and Active Directory in general.
z The all-in-one does not support the plain text authentication scheme.
z The all-in-one does not support server referrals (Distributed File System, or DFS).
To configure the network parameters
z Embedded Web server (network connection)
Open the Embedded Web server and click the Networking tab.
z Control panel
Press M
ENU , open the NETWORK & I/O menu, and use the Enhanced I/O option. Note
that the items that are available for configuration depend on the particular print server that
is installed.
z HP Web Jetadmin
Open the HP Web Jetadmin software. See the software documentation for information
about configuring network parameters.