Maintenance menu – HP 9100 series User Manual
Page 250
248 A - Control-panel mode and setup menus
ENWW
MAINTENANCE menu
Menu item
Description
Set date & time
Configures the date and time that is used for fax headers.
See
Configuring the time, date, and fax header
for more information.
Check ink level
Shows the ink levels in percentages.
See
Monitoring the operation and status
for more information.
Clean printheads
Starts the procedure for cleaning the printheads.
See
for more information.
Align printheads
Starts the procedure for aligning the printheads.
See
for more information.
Calibrate color
Starts the procedure for calibrating color.
See
for more information.
Calibrate linefeed
Starts the procedure for calibrating linefeed.
See
for more information.
Ring and beep
volume
Determines the volume of sound for rings and for beeps that occur when keys
are pressed on the control panel.
When you change the
Country/region
option on the ADMIN menu, this option
changes to the default for the country/region that has been chosen.
See
Setting the ring and beep volumes
for more information
Set powersave mode
time
Sets how long the printer remains idle before it enters PowerSave mode (for
example, 15 minutes, 1 hour, or 4 hours).
PowerSave mode does the following:
z
Minimizes the amount of power consumed by the all-in-one when it is idle.
z
Reduces wear on electronic components in the all-in-one (turns off the
display backlight, but the display is still readable).
The all-in-one automatically comes out of PowerSave mode when you start a
job, press a control-panel button, or open the print-carriage access door.
Paper path test
Opens the PAPERPATH TEST submenu, which is used to start the test. The
paper path test causes the pick mechanism in the all-in-one to pull paper from
the tray that you select. The test is useful for checking whether the pick
mechanism is working properly.
The PAPERPATH TEST submenu also contains the following options for
running the test.
z
Source
(selects the tray whose paper path you want to test—either tray 1 or
tray 2; the paper path test does not test the ADF input tray)
z
Duplex
(determines whether the media goes through the auto-duplex unit
during the test)
z
Copies
(selects how many sheets of media from the tray that has been
selected are to be used for the test)
Print diagnostic
page
Use this page under the direction of HP customer support for troubleshooting
purposes.