HP 9100 series - Manual (Page 39)

ENWW Loading the originals 37
Loading the originals
You can load originals in two places:
z Automatic document feeder (ADF)
z Flatbed scanner
If originals are present both in the ADF and on the flatbed scanner glass, the ADF takes
priority. For the best quality scans, use the flatbed scanner.
This section contains information about the following topics.
z Loading an original in the automatic document feeder (ADF)
z Loading an original on the scanner glass
Loading an original in the automatic document feeder (ADF)
The all-in-one has an ADF, which you can use to load up to 50 originals. See Loading the print
media for information about media sizes, types, and weights that are supported and for
recommendations about media to use in the ADF.
To load an original in the ADF
1 Place all originals in the ADF input tray with the print-side up and with the first page to be
scanned, copied, or faxed on top of the stack.
Note If the originals are printed on both sides, select the appropriate duplex option using the 2- SIDED
OPTIONS button on the control panel.
When you scan for photos or JPEG files, the all-in-one supports only single-sided scanning.
The control panel prompts you to place the original on the scanner glass.
2 Adjust the ADF width adjustors to fit the size of the originals.