Loading the print media, Tips for loading the media, Loading the media in tray1 or tray2 – HP 9100 series User Manual
Page 41: Loading the print, Media, Loading the media in tray 1 or tray 2
ENWW
Loading the print media 39
Loading the print media
This section contains information about the following topics.
z
z
Loading the media in tray 1 or tray 2
z
Tips for loading the media
You can load up to 150 sheets of paper in tray 1 and up to 250 sheets of paper in tray 2.
z
Use tray 1 for media types such as envelopes, cards, transparencies, and photo paper.
z
Always use media that conforms to the specifications. See
for
more information.
z
When you are loading a tray, position the media print-side-down with the right edge of the
media against the right edge and front guide of the tray. For preprinted forms and
letterhead, load the media with the top edge feeding into the all-in-one first.
z
To prevent jams, load only one type of media at a time into a tray.
z
When adding media, always remove the existing media and realign the media width and
length adjustors to fit the new media.
See
for more information about avoiding jams.
Loading the media in tray 1 or tray 2
1
Pull the tray out of the all-in-one.
2
If you are loading tray 1, raise and remove the output tray.