Using presets – HP 9100 series User Manual
Page 72
70 5 - Copying
ENWW
Using presets
If you frequently use the same set of copy options for a particular kind of job, you can save the
options as a preset. You can then apply the preset to future copy jobs.
You can create up to three presets.
To store copy settings into a preset
1
On the control panel, press C
OPY
.
2
Change the copy settings to those that you want to save as a preset.
3
Press M
ENU
.
4
Press
(down) to move to
Set Copy presets
.
5
Press - or + to select the preset that you want to save the settings into, and then press
(select).
6
Use the keypad or keyboard to type a name for the preset, or accept the default name.
Then press
(select).
A name is optional. If you do not provide one, a default name is used (Preset 1, Preset 2,
or Preset 3).
To apply a preset to a copy job
1
Load the original on the scanner glass or in the ADF. See
for more
information.
2
If required, type your PIN on the keypad or keyboard.
3
Press C
OPY
.
4
Press
(down) to move to
Preset
.
5
Press - or + to select the preset that you want, and then press
(select).
6
Press S
TART
.