Use or configuration problems, Table – HP A7818-IE002 User Manual
Page 167
Troubleshooting Your Workstation
Use Or Configuration Problems
Chapter 7
167
Use Or Configuration Problems
If your workstation boots normally, but you are having problems using or configuring
your workstation.
Symptom
Type of Problem
Refer To
Workstation starts to boot, but
a POST (Power-On Self-Test)
error message is displayed on
the screen.
•
CMOS test error.
•
Keyboard or mouse are not working
correctly.
•
Floppy disk drive LED does not appear.
•
Hard disk drive, DVD, CD-RW or
CD-ROM drive are not accessible.
•
Serial or Parallel ports are incorrectly
configured.
•
Devices are not cabled correctly.
•
Device drivers missing or incorrectly
installed.
An error message appears on the MaxiLife LCD during runtime.
You cannot turn off the workstation.
You have forgotten your
password.
•
Can’t start the workstation
Your workstation has a
software problem.
•
Software application will not run.
•
Date and time are wrong.
Your workstation repeatedly loses its configuration settings.
You have problems using the Euro symbol.
Helpful Information
Refer To
If You Have Forgotten Your BIOS Password
Troubleshooting BIOS Problems:
•
Updating the BIOS
•
Restoring the BIOS Default Settings
•
Clearing the CMOS
•
Recovering the BIOS (Crisis Mode)
System Board Switches
Using the HP Setup Program
Troubleshooting Drives With a Problem: