HP A7818-IE002 - Manual (Page 100)

Hardware Components
PCI Cards
Chapter 5 100
PCI Cards
HP 10/100 TX PCI LAN Interface
The 10/100 TX LAN Interface is a 32-bit PCI 2.2 card that supports 10Mbits per second
(10Base-T) and 100Mbits per second (100 TX) transfer speeds, and both half and full
duplex operation.
HP 10/100 TX PCI LAN Interface Features
Feature Description
RJ45 connector Connection to Ethernet 10/100 TX autonegotiation
BootROM Protocols:
• PxE 2.0
• On-board socket support up to 128Kb
Remote Power On
(RPO) Full remote power on using Magic Packet for Microsoft
Windows NT 4.0 in APM mode.
Remote Wake Up
(RWU) Enable and Wake Up from Suspend state using Magic
Packet and Pattern Matching for Microsoft Win2000 in
ACPI mode.
This feature enables a host computer to remotely (over
the network) power on computers and wake computers up
from energy-saving sleep mode. To enable these features,
use the Setup program to configure the BIOS.
Power Management • OnNow 1.0
• Advanced Power Management 1.2
• PCI Power Management 1.1
• WfM 2.0 compliant, ACPI
Manageability • Desktop Management Interface (DMI) 2.0 dynamic
driver
• DMI 2.0 SNMP mapper
• PXE 2.0 Flashable BootROM (optional on socket)
Diagnostic • Mac address DOS report tool
• User Diag for DOS