HP A7818-IE002 - Manual (Page 127)

Installing Or Replacing Parts And Accessories
Installing SCSI Drives
Chapter 6 127
Installing SCSI Drives
Models with a SCSI card can be connected to up to five internal SCSI devices. Figure 6-8
shows both SCSI and IDE cables.
Figure 6-8 Cables and Connectors (SCSI Models)
NOTE The total length of the external SCSI cables should not exceed 3 meters (approximately
10 feet).
Secondary IDE
cable
Primary IDE cable
16-bit Internal U160
68-pin SCSI connector
16-bit SCSI
Terminator
fitted on cable
SCSI Card in
workstationI Slot
16-bit SCSI cable with
three 68-pin connectors
Two IDE data cables
each with two 40-pin
connectors for IDE
Drives
Cable with one 34-pin
connector for 3.5-inch
Floppy Disk Drive
Floppy Disk Drive
Connector
Secondary IDE
Connector
Primary IDE Connector
External 68-pin SCSI
connector accessible from
the rear of the workstation