Native Instruments MASCHINE+ Standalone Production and Performance Instrument - Manual (Page 61)

7.3.7. Network Settings
The Network settings page contains options related to connecting MASCHINE+ to a Wi-Fi
network. Before you make a connection, available Wi-Fi networks are listed on the right-hand
display. Connecting to a network enables you to download plug-ins to your library from your Native
Instruments account (see, Library Settings ), update the system, and connect to an Ableton Link
session (see, MIDI Settings ) so you can sync to external devices.
To display the Network settings page:
1. Press SETTINGS .
2. Use the 4-D encoder to select Network .
3. Use the Buttons and Knobs 1–8 to change settings.
The Network page provides the following settings:
Buttons
Setting Description
CONNECT Connects to the selected network. Use the 4-D encoder to select a network,
then press Button 8 ( CONNECT ) to log-on to that network. You will need the
network credentials to log-on.
REFRESH Refreshes the list of available Wi-Fi networks. Press Button 5 ( REFRESH ) to
update the list.
DISCONNECT Disconnects from the current Wi-Fi connection. Press Button 8
( DISCONNECT ) to disconnect.
Knobs
Setting Description
Airplane
Mode
Enabled Activates or deactivates Airplane mode. When activated, this mode
suspends Wi-Fi network signal transmission from MASCHINE+, effectively
disabling the network service. As the name suggests, this mode is for use in
environments where you are not allowed to use Wi-Fi.
For more information on connecting to Wi-Fi networks, and Ableton Link, see Connecting
to Wi-Fi and Syncing MASCHINE+ using Ableton Link .
7.3.8. About Settings
The About page provides an overview of the System version, MASCHINE version, and firmware
installed on your MASCHINE+. You can also use this page to view a list of MASCHINE+ credits and
select whether you want to disable usage data tracking.
To display the About page:
1. Press SETTINGS .
2. Use the 4-D encoder to select About .
WORKING WITH MASCHINE+
54