Deleting groups and sounds, Adjusting the velocity, Adjusting the length – Native Instruments MASCHINE+ Standalone Production and Performance Instrument User Manual
Page 138

4.
Press the pads representing the steps you want to adjust or select single steps using the 4-D
encoder.
5.
Turn Knob 2 to adjust the
PITCH
value.
→
The pitch of the selected steps is adjusted and the current value is visible on the displays.
Adjusting the Velocity
To finely adjust the velocity of the selected steps:
1.
Press
STEP
.
2.
Press the pads representing the steps you want to adjust or select single steps using the 4-D
encoder.
3.
Turn Knob 3 to adjust the
FIX VEL
value.
→
The velocity of the selected steps is adjusted and the current value is visible on the displays.
All new steps will also use this selected value.
Adjusting the Length
To finely adjust the length of the selected steps:
1.
Press
STEP
.
2.
Press the pads representing the steps you want to adjust or select single steps using the 4-D
encoder.
3.
Turn Knob 4 to adjust the
LENGTH
value.
→
The length of the selected steps is adjusted and the current value is visible on the displays.
If you have a long Pattern and cannot see the steps you want to edit on the right display,
press Button 5 (
FOLLOW
) to see each section of the Pattern.
12.1.3. Deleting Groups and Sounds
Using shortcuts it's possible to delete Groups and Sounds from your Project.
To delete a Group from your Project.
1.
Hold
SHIFT
+
ERASE
.
2.
Then press the Group (
A
–
H
) you want to delete.
→
The selected Group and all of its Sounds are deleted.
To delete a Sound from your Project.
1.
Hold
SHIFT
+
ERASE
.
2.
Then press the Sound (
1
–
16
) you want to delete.
→
The selected Sound and any applied effects are deleted from the pad.
WORKING WITH PATTERNS AND CLIPS
131