Native Instruments MASCHINE+ Standalone Production and Performance Instrument - Manual (Page 205)

In Sampling mode, press Button 4 to access the ZONE page.
18.5.2. Editing Zones
At the bottom of the left display, the Zone settings allow you to adjust how each Zone should be
played back.
The Zone settings
The various parameters always display the values for the focused Zone .
The parameters available in the Zone settings are spread over five pages.
▶ Use the Page buttons on the left of the displays to select the desired page.
Page 1 – Play Range Parameters
The parameters in the Play Range page allow you to adjust the portion of the Sample that will be
played back when the Zone is triggered.
The ZONE, page 1 of 5: Play Range parameters
SAMPLING AND SAMPLE MAPPING
198