Native Instruments MASCHINE+ Standalone Production and Performance Instrument - Manual (Page 188)

The default Sample page
After recording a sample the RECORD tab becomes available.
▶ In Sampling mode, press Button 1 to access the RECORD page.
→ The Record page appears.
The RECORD page in the Sampler
18.2.2. Selecting the Source to Record
Here you can select the type of source you want to record.
To select a Source type:
▶ Turn Knob 1 ( SOURCE ).
The following options are available:
• To record stereo external audio signals connected to your audio interface, select Ext. Ster. .
• To record mono external audio signals connected to your audio interface, select Ext. Mono .
• To record audio signals coming from MASCHINE+ itself, select Internal .
To select an Input type:
▶ Turn Knob 2 ( INPUT ).
The following options are available:
• If SOURCE is set to Ext. Ster. , you can select either of the external stereo inputs In 1–4.
• If SOURCE is set to Ext. Mono , you can select either of the eight external mono
inputs: the left (“ L ”) or right (“ R ”) channel of each input pair In 1–4.
SAMPLING AND SAMPLE MAPPING
181