Creating and deleting section banks, Selecting a section bank, Moving a section – Native Instruments MASCHINE+ Standalone Production and Performance Instrument User Manual
Page 183
• If you have selected the Section by pressing a pad, or if you have selected a Section outside the
current Loop Range:
• The Loop Range is set to the selected Section, see section Selecting a Loop Range.
• If playback is off the playhead immediately jumps to the beginning of the selected Section. If
playback is on the playhead jumps according to the Perform Grid settings, see section
Jumping to Other Scenes.
• If you have selected a Section within the current Loop Range via the Page buttons, the Loop
Range and the playback position stay untouched.
17.3.4. Creating and Deleting Section Banks
A new Section bank is automatically created once you fill an entire bank with Sections.
To delete a Section bank:
1.
Press
IDEAS
(
Song
)
2.
Press
SHIFT
, then Button 2 (
SONG
).
3.
Press and hold
SCENE
(
Section
) to enter Section mode.
4.
If required, press Button 7 and 8 to select the desired Scene bank.
5.
Press
SHIFT
+ Button 6 (
DELETE
) to delete the selected Scene bank.
→
The Section bank is deleted including all its Sections. The following banks are shifted up to fill
the gap.
17.3.5. Selecting a Section Bank
You can select a Section located in another Section bank.
To select a Section located in another Section bank:
1.
Press
SHIFT
+
SCENE
to enter Song view.
2.
Press
IDEAS
(
Song
), then
SHIFT
.
3.
Press Button 2 (
SONG
)
4.
Press and hold
SCENE
to enter Scene mode (or pin it by pressing
SCENE
+ Button 1).
5.
Press Button 7 or 8 to select the previous/next Section bank.
17.3.6. Moving a Section
Reordering Sections is essential to organize and arrange your song.
To move a Section:
1.
Press
IDEAS
(
Song
).
2.
Press
SHIFT
+ Button 2 to enter Song view.
3.
Press and hold
SCENE
(
Section
) to enter Section mode (you can pin it by pressing Button 1).
4.
If required, press Button 7 and 8 to select the Section bank containing the Section you want to
move.
5.
Press the pad of the Section you want to move.
6.
Turn Knob 1 (
POSITION
) to move the selected Section to another position in your
arrangement.
→
The Section takes its new place. In Section mode you can now select this Section via the pad
corresponding to its new location.
ARRANGING YOUR PROJECT
176