Native Instruments MASCHINE+ Standalone Production and Performance Instrument - Manual (Page 151)

Configuring the Audio Routing
All the procedures described in the following sections make use of the Channel properties. To
follow these procedures, switch to Control mode and navigate to the desired Channel properties
as described in section Navigating Channel Properties, Plug-ins, and Parameter Pages .
13.2.1. Sending External Audio to Sounds
Each Sound can be configured to receive external audio signals. These audio signals can be
coming from the following sources:
• Outside MASCHINE+ from the audio inputs or from a connected audio interface.
• Additional outputs of multiple-output Plug-ins that might be loaded somewhere else in your
Project.
Each Sound can use one external stereo input. The same external signal can be fed into any
number of Sounds.
For example, this allows you to have any external audio signal be processed by the Plug-ins loaded
in that Sound, and more generally, integrate external audio signals into the MASCHINE+ routing
and processing system. See also section Applying Effects to External Audio for an example of
use and step-by-step instructions.
The configuration of external audio inputs for a Sound is done on the Audio page of the Sound’s
Input properties.
The Audio page of the Input properties is available for Sounds only.
The AUDIO page of the Input properties for a Sound
Please refer to section Navigating Channel Properties, Plug-ins, and Parameter Pages in
the Control Area to learn how to access the Audio page of the Input properties.
Controls Description
AUDIO
Section
AUDIO ROUTING, REMOTE CONTROL, AND MACRO CONTROLS
144