Native Instruments MASCHINE+ Standalone Production and Performance Instrument - Manual (Page 24)

You can choose which device you want to use with the MASCHINE software. This can be done
both from your hardware and in the software.
For more information, on the MASCHINE software, release refer to the MASCHINE
Software Manual available from the Native Instruments website.
You can select the desired device from the Controller menu in MASCHINE:
Click the Controller menu in the MASCHINE software and select the device you want to use.
Hardware
On the hardware device you want to use with the MASCHINE software, do the following:
• MASCHINE+: Press SHIFT + PLUG-IN , turn the 4-D encoder to select the desired instance and
press the 4-D encoder or Button 4 to load it.
• MASCHINE MK3 controller: Press SHIFT + PLUG-IN , turn the 4-D encoder to select the desired
instance and press the 4-D encoder or Button 4 to load it.
• MASCHINE STUDIO controller: Press SHIFT + PLUG-IN , turn the jog wheel to select the desired
instance and press the jog wheel or Button 8 to load it.
• MASCHINE (MK1 & MK2) controller: Press SHIFT + STEP , turn Knob 8 (or press Button 5/6) to
select the desired instance, and press Button 8 to load it.
• MASCHINE MIKRO (MK1 & MK2) controller: Press SHIFT + F2 , turn the Control encoder to
select the desired instance and press the Control encoder to load it.
• MASCHINE JAM controller: Press SHIFT + H ( INSTANCE ), turn the Control encoder to select the
desired instance and press the Control encoder to load it.
• KOMPLETE KONTROL Keyboard MK1: Press INSTANCE and turn the Control encoder to select
the desired instance, and press the Control encoder to load it.
• KOMPLETE KONTROL Keyboard MK2: Press INSTANCE and turn the 4-D encoder to select the
desired instance, and press the 4-D encoder to load it.
For more information on Controller mode, see Standalone vs. Controller Mode .
CONNECTING MASCHINE+
17