Native Instruments MASCHINE+ Standalone Production and Performance Instrument - Manual (Page 142)

Element Description
TIME SHIFT
Step Set the amount of time shift per step. The value is applied to all notes
and will move them randomly in both plus and minus values according
to the overall percentage set here.
Step can be changed from +/- 0-50% in 5% increments. Press SHIFT to
change in finer increments of 1%.
Random Mode Parameters
Element Description
PROBABILITY
(Keyboard mode)
Probability Set the probability of how often a note is created.
At 50% a note may or may not be created at each step.
At 100% a note will be created at every step of the Pattern.
Probability can be changed from 10-100% in 10% increments. Press
SHIFT to change in finer increments of 1%.
NOTE RANGE
(Keyboard mode)
Note Lo Create notes no lower than the set value.
Note Hi Create notes no higher than the set value.
VELOCITY RANGE
Velocity Lo Create notes with a velocity no lower than the set value.
Velocity Hi Create notes with a velocity no higher than the set value.
CHORDS
(Keyboard mode)
Note Count Set the number of notes that are available to make up a chord per step.
This is also calculated in relation to the Note Count set in the
DISTRIBUTIONS section. The Note Count range is from 1 to 6 .
NOTE LENGTH
Steps Set the length of a note in steps.
The value ranges from 1 to 6 steps per note. Press SHIFT to change in
finer increments.
TIME SHIFT
WORKING WITH PATTERNS AND CLIPS
135