Native Instruments MASCHINE+ Standalone Production and Performance Instrument - Manual (Page 146)

To clear a Clip in Song view:
1. Select the Clip you want to clear using the left and right Page buttons (arrow buttons).
2. Press SHIFT + Pad 9 .
12.2.6. Adjusting the Length of a Clip
In the Song view, you can adjust the length of a Clip. When you adjust the length, it snaps to the
nearest position on the grid, using the current Arrange Grid value. You can override the grid by
holding down SHIFT while dragging the Clip.
To adjust the start of a Clip on the Arranger:
1. Hold SHIFT + IDEAS ( Song ).
2. Then press Button 2 ( SONG ) to select the Song view.
3. Press Button 2 ( CLIPS ) to select Clips.
4. Use the Page button to select the clip you want to adjust.
5. Turn Knob 4 to adjust the length of the selected Clip.
→ The length of the Clip is adjusted.
To adjust the start of a Clip in Clip view:
1. Press SHIFT + PATTERN .
2. Release SHIFT .
3. Turn Knob 4.
→ The length of the Clip is adjusted.
12.2.7. Adjusting the Start of a Clip
In the Song view, you can adjust the start of a Clip. When you adjust the start point, it snaps to the
nearest position on the grid, using the current Arrange Grid value.
To adjust the start of a Clip on the Arranger:
1. Hold SHIFT + IDEAS ( Song ).
2. Then press Button 2 ( SONG ) to select the Song view.
3. Press Button 2 ( CLIPS ) to select Clips.
4. Use the Page button to select the clip you want to adjust.
5. Turn Knob 3 to adjust the start of the selected Clip.
→ The start of the Clip is adjusted.
To adjust the start of a Clip in Clip view using your hardware:
1. Press SHIFT + PATTERN .
2. Release SHIFT .
3. Turn Knob 3.
→ The start of the Clip is adjusted.
Press SHIFT to override the Arranger Grid and adjust the Clip in smaller intervals.
WORKING WITH PATTERNS AND CLIPS
139