Native Instruments MASCHINE+ Standalone Production and Performance Instrument - Manual (Page 38)

By default, each of these buttons needs to be held in order to use the corresponding mode
Pinning Modes
You can also pin (lock) modes on MASCHINE+, so they do not switch back when releasing a mode
button:
1. Press and hold a mode button, for example, PATTERN .
2. Press Button 1 above the left display.
→ On the left screen, the PATTERN label under Button 1 gets highlighted. You can release the
PATTERN button: MASCHINE+ will remain in Pattern mode until you press PATTERN again.
Once a mode has been pinned MASCHINE+ will automatically pin the mode next time it is
pressed.
You can unpin the active mode by pressing Button 1 again.
Here is a list of all buttons that you can pin by simultaneously pressing Button 1:
• All buttons in the column at the left of the pads ( SCENE , PATTERN , …, SOLO , MUTE ).
COMMON OPERATIONS
31