Native Instruments MASCHINE+ Standalone Production and Performance Instrument - Manual (Page 170)

4. If you have selected the first Plug-in slot of a Sound, turn Knob 2 to select the VENDOR ,
INTERNAL , or Native Instruments .
→ The right display shows only Effect Plug-ins of the type you have selected.
5. Turn the 4-D encoder or Knob 8 to browse the effects Plug-ins corresponding to your
selection.
6. When you have found the Plug-in you want to use, press the 4-D encoder or Button 8 ( LOAD )
to load it. You can also use Buttons 5 and 6 to step through the list and load each effect
directly.
→ The selected effect is loaded in a new Plug-in slot and directly starts to process your external
audio. By pressing PLUG-IN or SHIFT + BROWSE again you can switch back to Control mode
and adjust the effect.
15.4. Creating a Send Effect
Sometimes you may want to have a classic send effect, for example, a reverb which can be shared
by multiple sound sources. To make use of a send effect, you need to:
• Step 1: Set up a Sound or Group as send effect. This is done by loading an effect into its first
Plug-in slot: Step 1: Set Up a Sound or Group as Send Effect .
• Step 2: Route a portion of the desired audio signals from their original Sounds and Groups to
that send effect. This is done via the Output properties of the corresponding Sounds and
Groups: Step 2: Route Audio to the Send Effect .
15.4.1. Step 1: Set Up a Sound or Group as Send Effect
The procedure to set up a Sound or Group as a send effect is straightforward: You just need to
load an effect into its first Plug-in slot — MASCHINE will take care of the rest and make it available
as a destination for other channels of your Project.
Set Up a Sound as Send Effect
1. Press the PLUG-IN button to enter Control mode and show the Plug-in slots.
2. Press Button 3 to select the SOUND tab
3. Press the Group button A – H of the Group containing the empty Sound you want to use. If the
Group in question is in another bank, before you select the Group you first need to press
SHIFT + the corresponding Group button A – H to select its Group bank.
USING EFFECTS
163